1. Bmw Sp-daten V38 Download Windows 10
  2. Bmw Sp-daten V38 Download Software

BMW SP Daten 2.39.0 V39 The original factory firmware, designed to upgrade the software of electronic control units (ECU) vehicle and motorcycle company. This firmware BMW SP Daten 2.39.0 V39 used in conjunction with programs WinKFP, NCS Expert, Inpa (BMW Standard Tools). Find K+DCAN & Enet Cables and the Bmw Software you need all in one place.

What is Mike’s Easy BMW Tools?

Mike’s Easy BMW Tools gives users a single simple installation that provides them the latest version of the standard BMW tools including all the English patches needed to make the tools usable for English speaking users. The package takes care of almost all the configuration necessary to get up and running and makes it easy for novice users to dive in to coding and diagnostics without the need for figuring out how to configure installations.

Thank’s to Mike’s generosity,share this useful BMW software to us.

Mike’s Easy BMW Tools will install:

– Inpa 5.0.6 (with English script files)
– EDIABAS 7.3.0
– NCS Expert 4.0.1 (with English menus and buttons, and NCS Dummy Profile)
– NCS Dummy 0.6.0.4
– Tool32 4.0.3
– WinKFP 5.3.1
– BMW Coding Tool v2.5.0 (for use as an alternative to NCS Dummy, or to update DATEN files)
– Integrated SP-DATEN v53.3

Models Supported

E31, E34, E36, E38, E39, E46, E52, E53, E60, E65, E70, E83, E85, E87, E90
F01, F02, F07, F010, F011, F025, F30

Mike’s Easy BMW Tools Download:

And if you need download BMW Tool software separately:

BMW E-sys 3.30.01 3.29.0 3.28.1 Coding Software Download

If you need NEWEST 4.25 version please refer:

BMW ISTA+ 4.25 & ISTA-P 3.67 Download & Installation 100% WORK

Installation Guide:

Here take Window 7 as a example,the installation guide on other is same as.

After the zip file downloading completing,decompressed it and run the “setup.exe”

Click “Next”

Next

Select “Install”

Please wait while the InstallShield Wizard installs Mike’s Easy BMW Tools.

This may take several minutes.

And the just wait for installation completed

And click “Finish”.

Final Step:

Bmw Sp-daten V38 Download

The only thing left to do is get your USB/COM cable working. During the installation the drivers for your cable were installed. If you plug in your cable now, Windows should recognize it and start installing it.

After it is done, we have one thing left to do – we need to ensure the cable is using the right port number on your computer.

First, open Control Panel (Start > Control Panel)

Bmw sp-daten v38 download software

Next double click System (If you don’t see System, make sure the View By on the top right of Control Panel says Large Icons

In System, click Device Manager

In Device Manager, expand Ports (COM & LPT) and find USB Serial Port. If it says COM1, you’re good to go. If not, continue with the instructions

Right click the USB Serial Port and choose Properties

Under the Port Settings tab, choose Advanced

Under the COM Port Number, choose COM1

Change the Latency Timer setting to 1

Click Okay to get out of both windows and you are done!

Readers who read this article also read:

What is BMW Coding Tool?

BMW Coding Tool is software used for update your Daten files for you. Only replacing the files that require replacing and skipping the files that don’t. Very easy!! Updating of new SP-daten files can be a pain. A lot of copy, paste and adjusting files. Manually and/or with Total Commander.

BMW Coding Tool System Requirement:

Window XP/Window 7/Window 8/Window 10 (Windows 32 or 64bit OS)

How to Use BMW Coding Tool?

First we need to set our default folders for NCSExpert, WinKFP, and EDIABAS. Follow the bellow screen shots!!

Once all the folders are set we can now proceed to updating our SPDatens. Doing this by selecting the “Select SP-source” button and then select the folder with the new SPDaten. I always like to start with the earliest model which is E36.

Now that we have set our SPDaten path we can now select the “Update SP-daten” button.

Only all NEWER files will be copied from:
…SP-DATEN-ExxECU –> …EDIABASECU
…SP-DATEN-ExxSGDAT –> …EC-APPSNFSSGDAT
…SP-DATEN-ExxSGDAT –> …NCSEXPERSGDAT
…SP-DATEN-ExxDATEN –> …NCSEXPERDATENExx
also update of files in …NCSEXPERDATEN

You will notice the files that have been replaced will display update –> **.** and the ones that did not require updating will display remain –> **.**

In my case as displayed in the image below all will show remain because I have already updated them.

I don’t recommend using this for WinKFP as my own tests and reports have shown that when updating a model for example E89, due to a glitch/bug in this version it deletes all other models expect for the one you just updated. However for those who don’t mind doing this for each model here are the steps…

Select the “Update WinKFP” button and all folders will be copied and replaced from:

…SP-DATEN-ExxDATA –> …EC-APPSNFSDATA
also update of SGIDC.AS2 in …EC-APPSNFSDATAGDATEN to adjust the “long lines”

Bmw Sp-daten V38 Download Windows 10

backup’s of all folders are saved as …name_date_time

Bmw Sp-daten V38 Download Software

BMW Coding Tool v2.5.0 Free Download:

BMW INPA 5.06 + EDIABAS 7.3.0 + NCS Expert 4.0.1 + WinKFP 5.3.1 + BMW Coding Tool v2.5.0 + NCS Dummy 0.6.0.4 free download ALL HERE!

How to Solve BMW Coding Tool V2.5 MSCOMCTL Error:
For those who get a MSCOMCTL.OCX error… please download the MSCOMCTL Error Fix.zip and follow the instructions

Readers who read this article also read: